Hydraulic Two Way Disc Plough for 65-120HP Tractors

The BSM hydraulic two way disc plough is designed for agricultural tractors from approximately 65HP to 120HP. It is mainly used for primary tillage, soil cutting, soil turning and farmland preparation before planting.

Compared with a traditional one way disc plough, the hydraulic reversible structure allows the operator to change the working direction through the tractor hydraulic system. This helps reduce empty travel and unnecessary repositioning during repeated back-and-forth field operations.

• Series: 1LY(SX)
• Matched tractor power: 65-120HP
• Disc quantity: 3-5 discs
• Working direction: Two way / reversible
• Reversing system: Hydraulic
• Working width: Approx. 900-1500mm
• Working depth: Approx. 200-300mm
• Disc diameter: Approx. 660-710mm
• Connection type: Three-point mounted

The main difference between this implement and a conventional one way disc plough is the hydraulic reversing system.

At the end of a field pass, the operator can change the working direction through hydraulic control and continue ploughing in the opposite direction.

This structure can reduce empty return travel and repeated manual repositioning, especially in medium and large fields with long working passes.

Hydraulic reversing becomes more useful as field size increases.

In long rectangular fields, repeated back-and-forth ploughing can be carried out more continuously because the implement can change its working direction without requiring the tractor to return empty along the field.

For small or irregular plots, the advantage may be less significant because turning distance is shorter and working passes are more fragmented.

The concave disc blades cut into the soil as the tractor moves forward, helping lift and turn the upper soil layer.

This makes the implement suitable for primary tillage before later operations such as disc harrowing, rotary tillage, leveling or planting.

The rotating disc structure can work in dry soil, hard surface soil, clay soil and farmland containing roots, weeds or moderate crop residue.

Actual working performance depends on tractor weight, 4WD traction, soil moisture, disc quantity, working depth and operating speed.

The current BSM hydraulic two way disc plough range includes approximately 3 to 5 disc configurations.

The final model should be selected according to tractor horsepower, tractor weight, rear lifting capacity, hydraulic output and field resistance.

The current product range is designed mainly for tractors from approximately 65HP to 120HP.

Typical tractor power levels can include 70HP, 80HP, 90HP, 100HP and 120HP when hydraulic output, tractor weight and lifting capacity are properly matched.

The disc plough uses a three-point mounted structure for tractor connection, lifting and transportation.

Before ordering, the tractor linkage and hydraulic interface should be confirmed to ensure correct matching.

A one way disc plough turns soil toward one fixed direction and normally uses a simpler mechanical structure.

A hydraulic two way disc plough can change its working direction through hydraulic control. This makes it more suitable for repeated passes in medium and large fields where reducing turning and empty travel is important.

For buyers who prefer a simpler structure or need a wider tractor horsepower range, compare the
Mounted One Way Disc Plough for 18-160HP Tractors.

Disc ploughing is normally part of the primary tillage stage. After the soil has been opened and turned, secondary tillage may be required to break larger soil clods and prepare a finer seedbed.

For finer soil preparation, compare the
1GQN Series Rotary Tiller for 25-100HP Tractors.

The final disc plough configuration should be selected according to tractor power, hydraulic output, rear lifting capacity and actual soil conditions.

For medium farm operations, compare the
70HP 4WD Farm Tractor for Mixed Farming and Implement Work.

For stronger field cultivation, compare the
80HP Farm Tractor for Field Cultivation and Implement Matching.

For larger tillage work, compare the
90HP Tractor with Disc Plough and Rotary Tiller Package.

Before ordering, buyers should provide the tractor model, horsepower, tractor weight, drive type, hydraulic output, rear lifting capacity, three-point hitch information, soil type, required working width and required working depth.

The final disc quantity and working configuration should be confirmed according to actual tractor and field conditions.

Disc blades, bearings, hubs, scrapers, hydraulic hoses, hydraulic components, bolts and other selected wearing parts can be supplied according to the final order configuration.

The tractor and disc plough can also be arranged as one export equipment package according to the destination and shipment plan.